It seems strangely polarizing to refer to the "old and cumbersome" interactive rebase approach in contrast to "the right approach" using `git history` which is a brand new, experimental feature as of Git 2.54 from April 20, 2026, a few months ago.
I have split a lot of work with interactive rebasing. I'm excited to try `git history split` and to have learned about it here. But the stylistic flourish makes it seem like it's been a feature for years that people just haven't moved to instead of being something shiny and new to be excited about trying.
I agree, interactive rebasing existed for ages and git history is mainly a user experience improvement over it. This way of framing git history goes way past engagement tricks and erodes the blogger's credibility.
> P.S. The stack overflow question for splitting commits discusses the old and cumbersome approach. The 20th answer discusses the right approach but has a meagre 2 upvotes as of today, compared to 2656 for the older top answer with the cumbersome approach.
It now has 5 upvotes. A long way to go to 2656 but at least it's going in the right direction.
Still, it shows how incredibly broken the StackOverflow system is. It's completely normal for older answers to become outdated, but they still act like the old answers are laws of nature.
> One of SO's selling points was that outdated answers get replaced with the more modern (...)
I don't think this is description is right. What you describe as "outdated answers" are actually answers to apply up to specific releases. Just because a project launches a release that rolls out a new feature that doesn't render the old answers wrong or stale.
It's due in part to the number of people that kept posting screenshots of their code in their question, and the number of people that couldn't search to save their life. The noise ratio on incoming questions was always ridiculous, and the number of people who don't know how to ask a technical question is staggering. I do wish they had started to ask a series of questions to people for their first 5 or 10 posts to force them to ask questions in a useful way that was conducive to getting answers. The whole site never got over being hostile to new users.
SO had a number of fundamental issues. If you found a duplicate and flagged it as such, you couldn't explain why you thought it was a dupe in the flag. This meant that "this is a different question but the answer is the same" was just tagged a dupe the same way "this is literally the identical question" was.
I stopped participating entirely after a single event. When I was moderating the moderation, and the site decided to give me a trick question to "test if I was paying attention". Yeah, no. I don't have time for that bullshit. Apparently I'm still a top 1% user, though, and I think I've gained another 8,000 or 9,000 points since I left and stopped answering at anything.
The rise of AI and the death of SO is a beautiful beautiful thing. That community is the worst, and this opinion seems to be shared universally by anyone who had extensive interaction with it.
> At least the answer is there. When asking ChatGPT (Plus) the same question, it only suggests the old ways.
The old ways are still the right answer for multiple reasons, such as they still clearly work with the latest release and odds are you and everyone around you is not running the latest and greatest version of git installed.
That's good to know, I'd usually go about it in a roundabout way: soft reset the commit then git add --patch to stage the hunks to split it into multiple commits.
I think you'll find your workflow is still required. `git history split` is really only focused on turning a commit into 2 commits, so if you wanted multiple, you would need to run the command multiple times.
Add to that, it's patch functionality isn't as robust as `git add --patch`. For example, you cannot edit a hunk, so if you intended to tease out atomic changes, you won't be able to.
Which gui? I’m on Mac and somehow I could never really be happy with gui‘s for git. Gitkraken is the last I tried and I found it too much cluttering. Paid choices weren’t that great aswell either (yet)
I had a team that insisted on a linear history and was constantly rebasing things. This workflow strongly favors "just squash it all together" before a rebase to avoid re-resolving the same conflicts. This workflow often produces big patches that reviewers end up asking to be broken back up. This experience and a recommendation from my manager at the time made a good git GUI like sourcetree a daily driver for me. It's just second nature to review my own changes every time I stage files and quickly do a mix of staging whole files or "hunk-based", even allowing clicking to select specific lines within a hunk intuitively, rather than using the terminal UI and asking git to take a guess at splitting a hunk. I find a good git GUI invaluable, I have used sourcetree for years and love it. Unfortunately sourcetree isn't available for Linux, but I recently found SourceGit which seems to be a decent substitute.
Highly recommend trying a good GUI out, I think you would likely have similar ah-ha moments about workflow optimizations, and honestly I just cannot understand how people get by in git without a convenient way to visualize the commit tree (and yeah I know there is a decent command line treeview, but the context switching all the time in the terminal to go from viewing the tree or even the simple log to exit out and ask for commit contents just is so much more fussy and tedious).
StackOverflow is really not great at handling questions for which the right answer changes over time. I guess it doesn't matter since SO is dead anyway: https://news.ycombinator.com/item?id=46482345
Is this yet another case of git improving its UI due to jujutsu?
(This is exactly how jj does it.)
If you like this kind of convenient CLI command, I would seriously recommend giving jj a try. To give you an idea, I never bothered splitting a commit in my git days. I do it almost daily with jj. Lots of other niceties that I didn't bother with in git, but routinely do in jj.
jj has fewer commands than git, yet does everything git does.
Yes this is how jj does it, except that jj is more powerful because it does automatic rebase of all the downstream commits.
If you have any descendants of the gir history split (i.e. it's not the most recent) you'll have to do some more work (a rebase) to get back to a useful history. I think you can do this in the middle of an interactive rebase which is ok, but still not as easy.
My understanding is that `git history` was started after seeing jj, yes. I don't have a citation for you though, I could be wrong, that's just what I remember.
The bit that made this click for me: it works on any commit in history, not just HEAD. Mark the commit as edit in git rebase -i, then git reset HEAD^ to uncommit it while keeping the changes in the working tree, and rebuild the pieces from there.
git add -p is the real workhorse for the rebuild: s splits a hunk into smaller ones, and e lets you hand-edit the hunk when the boundary doesn't fall on clean line breaks. Stage a coherent slice, git commit, repeat until the tree is empty, then git rebase --continue. The rebase's only job is to drop you at the right spot; add -p does the actual splitting.
Or the opposite direction, with repeated "git checkout -p ..." and commit steps. Slightly less comfortable because you have to figure out (such as from "git rebase --edit-todo") the later commit, but it makes testing the pieces easier.
I have split a lot of work with interactive rebasing. I'm excited to try `git history split` and to have learned about it here. But the stylistic flourish makes it seem like it's been a feature for years that people just haven't moved to instead of being something shiny and new to be excited about trying.
It now has 5 upvotes. A long way to go to 2656 but at least it's going in the right direction.
One of SO's selling points was that outdated answers get replaced with the more modern, better ones - and it worked for many, many years.
I don't think this is description is right. What you describe as "outdated answers" are actually answers to apply up to specific releases. Just because a project launches a release that rolls out a new feature that doesn't render the old answers wrong or stale.
It's due in part to the number of people that kept posting screenshots of their code in their question, and the number of people that couldn't search to save their life. The noise ratio on incoming questions was always ridiculous, and the number of people who don't know how to ask a technical question is staggering. I do wish they had started to ask a series of questions to people for their first 5 or 10 posts to force them to ask questions in a useful way that was conducive to getting answers. The whole site never got over being hostile to new users.
SO had a number of fundamental issues. If you found a duplicate and flagged it as such, you couldn't explain why you thought it was a dupe in the flag. This meant that "this is a different question but the answer is the same" was just tagged a dupe the same way "this is literally the identical question" was.
I stopped participating entirely after a single event. When I was moderating the moderation, and the site decided to give me a trick question to "test if I was paying attention". Yeah, no. I don't have time for that bullshit. Apparently I'm still a top 1% user, though, and I think I've gained another 8,000 or 9,000 points since I left and stopped answering at anything.
The old ways are still the right answer for multiple reasons, such as they still clearly work with the latest release and odds are you and everyone around you is not running the latest and greatest version of git installed.
I personally sort by ‘date modified (newest first)’ on StackExchange sites.
jj split --interactive {ref}
Add to that, it's patch functionality isn't as robust as `git add --patch`. For example, you cannot edit a hunk, so if you intended to tease out atomic changes, you won't be able to.
I use this only for the aforementioned purpose.
Highly recommend trying a good GUI out, I think you would likely have similar ah-ha moments about workflow optimizations, and honestly I just cannot understand how people get by in git without a convenient way to visualize the commit tree (and yeah I know there is a decent command line treeview, but the context switching all the time in the terminal to go from viewing the tree or even the simple log to exit out and ask for commit contents just is so much more fussy and tedious).
https://git-scm.com/docs/git-rerere
(This is exactly how jj does it.)
If you like this kind of convenient CLI command, I would seriously recommend giving jj a try. To give you an idea, I never bothered splitting a commit in my git days. I do it almost daily with jj. Lots of other niceties that I didn't bother with in git, but routinely do in jj.
jj has fewer commands than git, yet does everything git does.
If you have any descendants of the gir history split (i.e. it's not the most recent) you'll have to do some more work (a rebase) to get back to a useful history. I think you can do this in the middle of an interactive rebase which is ok, but still not as easy.
git add -p is the real workhorse for the rebuild: s splits a hunk into smaller ones, and e lets you hand-edit the hunk when the boundary doesn't fall on clean line breaks. Stage a coherent slice, git commit, repeat until the tree is empty, then git rebase --continue. The rebase's only job is to drop you at the right spot; add -p does the actual splitting.
[0] https://news.ycombinator.com/newsguidelines.html